CONNECTION: SECURE // NODE: GUEST_PROTOCOL

THISOLDSCOT

Electronics Repair – Scotland

Request Repair
Designs / ,

M18 Proximity Sensor Brackets

Straight and right-angled mounting brackets for M18 barrel proximity sensors, with 10/15/20 mm spacers.

Complete

View in 3DInteractive modelGitHub RepoSource & releasesMaterialsParts & hardwarePrintablesSearch by nameMakerWorldSearch by nameThingiverseSearch by name

Drag to rotate · scroll to zoom

PLA (black)Filament
205 °CNozzle temp
65 °CBed temp
60 mm/sPrint speed
5/4Top/bottom layers
3Perimeters
20%Infill
PEISurface

Straight and right-angled mounting brackets for M18 barrel proximity sensors, with three spacer depths — 10 mm, 15 mm and 20 mm — so you can set the sensor stand-off to suit the job.

License

Released under CC BY-NC-SA 4.0.

Files, Tools & Materials

Everything used in this build — documentation, downloads, verified hardware and the tools that made it possible.

Filament
Polymaker PolyTerra PLASOURCE: Amazon
VIEW_NOW

As an Amazon Associate I earn from qualifying purchases. Links below may be affiliate links that support ThisOldScot at no extra cost to you.

Related builds