CONNECTION: SECURE // NODE: GUEST_PROTOCOL

THISOLDSCOT

Electronics Repair – Scotland

Request Repair
Designs / ,

Lampshade Reducer Ring

A reducer adaptor ring for lampshades — 30 mm ID to 44 mm OD for smaller lamp holders.

Complete

View in 3DInteractive modelGitHub RepoSource & releasesMaterialsParts & hardwarePrintablesSearch by nameMakerWorldSearch by nameThingiverseSearch by name

Drag to rotate · scroll to zoom

PLA (white)Filament
205 °CNozzle temp
65 °CBed temp
60 mm/sPrint speed
5 / 4Top / bottom layers
3Perimeters
100%Infill
PrintBiteSurface

A quick lampshade reducer adaptor, made because a couple of new lampshades were missing the reducer needed for the smaller lamp holders.

The internal diameter is 30 mm and the outer diameter is 44 mm.

License

Released under CC BY-NC-SA 4.0.

Files, Tools & Materials

Everything used in this build — documentation, downloads, verified hardware and the tools that made it possible.

Filament
Polymaker PolyTerra PLASOURCE: Amazon
VIEW_NOW

As an Amazon Associate I earn from qualifying purchases. Links below may be affiliate links that support ThisOldScot at no extra cost to you.

Related builds